The Enshu ES400 is an ultra-compact, bridge-type vertical machining center designed for highly efficient production of small ferrous and non-ferrous parts. The bridge-type construction is easier to load/unload and provides an incredibly spacious work area for a machine with such a compact footprint. The ES400 is well suited for use as either a profitable stand alone VMC, or as dependable (MTBF5000H) units in multiple machine configurations such as automated cells and lean lines.
ES400 Machine Specifications |
| AXIS TRAVEL |
X Axis Travel
Y Axis Travel
Z Axis Travel
Distance from top of table to spindle nose |
19.69"
15.75"
14.96"
7.87" - 22.83" |
| FEEDRATES |
Rapid Traverse (X/Y/Z)
Cutting Feedrate (X/Y/Z)
Acceleration (X/Y/Z) - G |
2362 ipm
0.04" - 591 ipm
0.83/0.83/0.64G |
| TABLE |
Table Work Surface
Table Surface Design
Maximum Table Load
Distance from Floor to Top of Table |
27.56" x 15.75"
(3) 0.6" T-slots
1100 lbs.
31.5" |
| SPINDLE |
Spindle Taper
Spindle Speed Range
Spindle Drive Type
Spindle Horsepower (1 min/cont)
Spindle Torque
Rigid tapping (max. rpm) |
BT30
40-13,000 RPM
Direct Drive
7.5 / 2.0HP
17.5 ft/lbs.
8,000 |
| ACCURACY |
Positioning (full stroke, all axis)
Repeatability X/Y/Z |
0.0002"
± 0.00006 |
| AUTOMATIC TOOL CHANGER |
Tool Shank Type
Tool Storage Capacity
Max. tool diameter (adj. Pocket empty)
Max. tool length
Max. tool weight
Tool change time (tool-tool)
Tool change time (chip-chip) |
BT30
21
2.95” (4.13")
7.87”
7.72lbs.
1.9 sec.
2.9 sec. |
| AUTOMATIC PALLET CHANGER |
Pallet size
Max. load, lbs. per side
Min. index angle
Table index time |
19.7” x 19.7”
1,100
.001 degree
7 seconds |
| MACHINE ELECTRICS |
| Electric Power Supply
Max Power Consumption
Compressed Air |
200V AC ±10% 3-ph 50/60Hx ±2%
220V AC ±10% 3-ph 60Hx ±2%
19KVA
43-116 psi |
| MACHINE DIMENSIONS & WEIGHTS |
Weight
Size (WxDxH) |
7,716 lbs.
48"x129"x115" |
| |
| Note: specifications and equipment supplied subject to change without notice |
