The Enshu EV450 is a high-performance, traveling-column, full-process vertical spindle machining center designed for maximum efficiency at both ends of the job lot size spectrum. The EV450 is well suited for machining tough ferrous castings as well as non-ferrous die castings.
EV450 Machine Specifications |
| AXIS TRAVEL |
X Axis Travel
Y Axis Travel
Z Axis Travel
Distance from top of table to spindle nose |
22"
17.7"
18.1"
7.9" - 26" |
| FEEDRATES |
Rapid Traverse (X/Y/Z)
Jog Feedrate
Acceleration (X/Y/Z) |
1575 ipm
0.4 - 591 ipm
0.5G |
| TABLE |
Table Work Surface
Table Surface Design
Maximum Table Load
Distance from Floor to Top of Table |
31.5" x 17.7"
Three parallel T-slots, "X" axis 0.7" wide
1100 lbs.
31.5" |
| SPINDLE |
Spindle Taper
Spindle Speed Range
Spindle Horsepower (15 min/cont)
Spindle Torque
Rigid tapping (max. rpm) |
CT40
40-10,000 RPM
10.2 / 5.0HP
70 ft/lbs.
4,000 RPM |
| ACCURACY |
Positioning (full stroke, all axis)
Repeatability X/Y/Z |
0.0002"
± 0.00012" |
| AUTOMATIC TOOL CHANGER |
Tool Shank Type
Tool Storage Capacity
Max. tool diameter (adj. Pocket empty)
Max. tool length
Max. tool weight
Tool change time (tool-tool)
Tool change time (chip-chip) |
CT40
20 tools
3.5" (5.7")
11.8"
17.6 lbs.
1.0 sec
3.5 sec |
| AUTOMATIC PALLET CHANGER (OPTIONAL) |
Pallet Work Surface
Maximum Pallet Load
Distance from Table to Spindle Nose
Distance from Front of Column to Spindle Center
Distance from Floor to Pallet Surface
Table Surface Design
Number of Pallets
Pallet Change Method
Pallet Change Time |
30.9" x 15.7"
550 lbs.
7.9" - 26"
20.1"
31.5"
Three parallel T-slots, "X" axis 0.7" wide
2
Rotary type
4.8 sec |
| MACHINE ELECTRICS |
| Electric Power Supply
Max Power Consumption
Compressed Air |
200V AC ±10% 3-ph 50/60Hx ±2%
220V AC ±10% 3-ph 60Hx ±2%
19.2KVA
71.1-113.8psi |
| MACHINE DIMENSIONS & WEIGHTS |
Weight
Size (WxDxH) |
11,790 lbs.
83" x 96" x 106" |
| |
| Note: specifications and equipment supplied subject to change without notice |
