The Enshu EV530 is a high-performance, fixed-column vertical machining center designed for maximum efficiency on both low and mid-range volume lots. Mill, drill, tap and bore. From ferrous castings and non-ferrous die castings to aerospace and automotive parts. Or dies and molds. The EV530 is a cost effective metal cutting “launch platform” to greater process capability and higher profits in your shop.
EV530 Machine Specifications |
| AXIS TRAVEL |
X Axis Travel
Y Axis Travel
Z Axis Travel
Distance from top of table to spindle nose |
39.4"
20.9"
20.1"
7.9" - 28" |
| FEEDRATES |
Rapid Traverse (X/Y/Z)
Jog Feedrate
Cutting Feedrate (X/Y/Z) |
1259 ipm
0 - 157 ipm
0.04 - 591 ipm |
| TABLE |
Table Work Surface
Table Surface Design
Maximum Table Load
Distance from Floor to Top of Table |
43.3" x 21.7"
Five parallel T-slots, "X" axis, 0.7" wide
2,200 lbs.
37.4" |
| SPINDLE |
Spindle Taper
Spindle Speed Range
Spindle Horsepower (15 min/cont)
Spindle Torque
Rigid tapping (max. rpm) |
CT50
40-6,000 RPM
29.5 / 24.8HP
217 ft/lbs.
3,000 |
| ACCURACY |
Positioning (full stroke, all axis)
Repeatability X/Y/Z |
0.0002"
± 0.00006 |
| AUTOMATIC TOOL CHANGER |
Tool Shank Type
Tool Storage Capacity
Max. tool diameter (adj. Pocket empty)
Max. tool length
Max. tool weight
Tool change time (tool-tool)
Tool change time (chip-chip) |
CT50
30 tools
4.9" (7.9")
13.8"
44 lbs.
2.0 sec
4.5 sec |
| AUTOMATIC PALLET CHANGER (OPTIONAL) |
Pallet Work Surface
Maximum Pallet Load
Distance from Table to Spindle Nose
Distance from Front of Column to Spindle Center
Distance from Floor to Pallet Surface
Table Surface Design
Number of Pallets
Pallet Change Method
Pallet Change Time |
31.5" x 20"
1100 lbs.
7.87"
23"
53"
Five parallel T-slots, "X" axis, 0.7" wide
2
Chain Type
14 sec. |
| MACHINE ELECTRICS |
| Electric Power Supply
Max Power Consumption
Compressed Air |
200V AC ±10% 3-ph 50/60Hx ±2%
220V AC ±10% 3-ph 60Hx ±2%
54KVA
71.1-113.8psi |
| MACHINE DIMENSIONS & WEIGHTS |
Weight
Size (WxDxH) |
15,840 lbs.
107" x 110" x 116" |
| |
| Note: specifications and equipment supplied subject to change without notice |
