The Enshu EV530S is a high-speed, high-performance, fixed-column vertical machining center designed for production machining of parts as well as roughing and high-speed finishing of hardened metal dies and molds. The EV530S is a cost effective metal cutting “launch platform” to greater process capability and higher profits in your shop.
EV530S Machine Specifications |
| AXIS TRAVEL |
X Axis Travel
Y Axis Travel
Z Axis Travel
Distance from top of table to spindle nose |
39.4"
20.9"
20.1"
7.9" - 28" |
| FEEDRATES |
Rapid Traverse (X/Y/Z)
Jog Feedrate
Cutting Feedrate (X/Y/Z)
with optional look-ahead control (HPCC) |
1259 ipm
0 - 157 ipm
0.04 - 591 ipm
1259 ipm |
| TABLE |
Table Work Surface
Table Surface Design
Maximum Table Load
Distance from Floor to Top of Table |
43.3" x 21.7"
Five parallel T-slots, "X" axis, 0.7" wide
2,200 lbs.
37.4" |
| SPINDLE |
Spindle Taper
Spindle Speed Range
Spindle Horsepower
Spindle Torque
Rigid tapping (max. rpm) |
CT40
40-13,000RPM
29.5 HP
122 ft/lbs.
3,000 |
| ACCURACY |
Positioning (full stroke, all axis)
Repeatability X/Y/Z |
0.0002"
± 0.00006 |
| AUTOMATIC TOOL CHANGER |
Tool Shank Type
Tool Storage Capacity
Max. tool diameter (adj. Pocket empty)
Max. tool length
Max. tool weight
Tool change time (tool-tool)
Tool change time (chip-chip) |
CT40
30 tools
3.1" (5.71")
11.8"
17.6lbs.
1.5 sec
4.0 sec |
| MACHINE ELECTRICS |
| Electric Power Supply
Max Power Consumption
Compressed Air |
200V AC ±10% 3-ph 50/60Hx ±2%
220V AC ±10% 3-ph 60Hx ±2%
54KVA
71.1-113.8 psi |
| MACHINE DIMENSIONS & WEIGHTS |
Weight
Size (WxDxH) |
15,840 lbs.
107" x 110" x 116" |
| |
| Note: specifications and equipment supplied subject to change without notice |
