EV650 Vertical Machining Center

 

The Enshu EV650 is a heavy frame, severe-duty vertical machining center. Specially designed box ways on all axes together with a high-torque, dual range CT50 taper spindle are more than a match for tough aerospace alloys or hardened tool steels common in the die and mold industry. In fact, given its technological and engineering advancements, there are few machines in the world as capable in hard materials as the EV650. It is truly in a class by itself.

 

EV650 Machine Specifications

AXIS TRAVEL
X Axis Travel
Y Axis Travel
Z Axis Travel
Distance from top of table to spindle nose

41.3" (Type A), 63.0" Type C
25.6"
26.0"
7.9" - 33.9"
FEEDRATES
Rapid Traverse (X/Y/Z)
Jog Feedrate
Cutting Feedrate (X/Y/Z)

787/787/591ipm
0 - 157 ipm
0.04 - 394 ipm
TABLE
Table Work Surface

Table Surface Design
Maximum Table Load
Distance from Floor to Top of Table

51.2" x 25.6" (Type A)
78.7" x 25.6" (Type C)
Five parallel T-slots, "X" axis, 0.7" wide
3,300 lbs.
36.4"
SPINDLE
Spindle Taper
Spindle Speed Range
Spindle Horsepower (15 min/cont)
Spindle Torque
Rigid tapping (max. rpm) 		CT50
20-6,000 RPM
20 / 10HP
352 ft/lbs.
3,000
ACCURACY
Positioning (full stroke, all axis)
Repeatability X/Y/Z		 0.0002"
± 0.00006
AUTOMATIC TOOL CHANGER
Tool Shank Type
Tool Storage Capacity
Max. tool diameter (adj. Pocket empty)
Max. tool length
Max. tool weight
Tool change time (tool-tool)
Tool change time (chip-chip)		 CT50
30 tools
4.9" (7.9")
15.7"
33lbs.
2.5 sec
6.6 sec
AUTOMATIC PALLET CHANGER (OPTIONAL)
Pallet Work Surface
Maximum Pallet Load
Distance from Table to Spindle Nose
Distance from Front of Column to Spindle Center
Distance from Floor to Pallet Surface
Table Surface Design
Number of Pallets
Pallet Change Method
Pallet Change Time		 78.7" x 25"
3,300 lbs.
7.9" - 33.9"
26.4"

53"
Five parallel T-slots, "X" axis, 0.7" wide
2
Chain Type
45 sec.
MACHINE ELECTRICS
Electric Power Supply

Max Power Consumption
Compressed Air

 200V AC ±10% 3-ph 50/60Hx ±2%
220V AC ±10% 3-ph 60Hx ±2%
65KVA
58-116psi
MACHINE DIMENSIONS & WEIGHTS
Weight

Size (WxDxH)		 22,700 (Type A)
24,024 (Type C)
165"x146"x120" (Type A)
117"x146"x120" (Type C)
 
Note: specifications and equipment supplied subject to change without notice

 

Standard Equipment
30 tool automatic tool changer
1000mm "X" axis travel - Type A
1600mm "X" axis travel - Type C
Fourth axis prewire
Spindle air curtain
Spindle oil chiller
Spindle load meter
Spindle flood coolant
Bed flush coolant system
Screw type chip augers
Manual pulse generator
Spindle speed, feedrate and rapid traverse overrides
Halogen work light
Three stage machine status stack light
Door interlock
One set "M" codes (one pair)
Program memory: 230-240 meters, depending on control
Helical interpolation
Inch/metric switch capability
Totally enclosed splash guard with manually operated door
Automatic power breaker
Standard tools for machine
Leveling bolts and blocks
Options Available
10,000 RPM spindle
Automatic pallet changer
Coolant through spindle (256 psi)
40 tool automatic tool changer
Automatic tool breakage detection
Auto tool length measurement
Lift-up chip conveyor
Custom macro "B" (Fanuc)
Part program storage - 320m, 640m or 1280m
Program restart
Tool length measurement
Tool life management
Tool offset addition - 64 to 1199 pairs, depending on control
Work coordinate system - 48 to 300 pairs, depending on control
Coordinate system rotation