JE50S Horizontal Machining Center

 

An compact, Ultra-performance Horizontal Machining Center for stand alone production, or for integration in lean lines or agile machining systems. Key design elements emphasize speed, power, reliable accuracy, and high uptime, shift after shift.

 

JE50S Machine Specifications

AXIS TRAVEL
X axis
Y axis
Z axis
Top of table-spindle c’line
C’line table-face of spindle

19.7”
19.7”
19.7”
9.85”-29.55”
5.9”-25.6”
FEEDRATES
Rapid traverse(X/Y/Z)
Cutting feedrate
Acceleration & decel. (X,Y)
Acceleration & decel. (Z)
Feed motors, AC servo, hp

2,362”/min.
.04-591”/min.
0.61G
1.2G
5 (X/Y/Z)
THRUST
X & Y axes
Z axis 		235 lbs.
675 lbs.
SPINDLE
Spindle Taper
Spindle bearing diameter
Spindle horsepower/type
Full power developed at
Spindle ramp-up time/rpm
Starting torque
Rigid tapping (max. rpm)
Lubrication type 		CAT40
2.56”
20 (peak) /direct
3,000rpm
1.8 sec./12,000
35 ft. lbs.
4,000
oil mist
AUTOMATIC TOOL CHANGER
Magazine capacity
Max. tool diameter
Max. tool length
Max. tool weight
Tool change time (tool-tool)
Tool change time (chip-chip) 		40
2.95”
13.78”
22 lbs.
1.5 sec.
3.1 sec.
ROTARY TABLE
Size
Max. load, lbs.
Min. index angle
Table index time
15.7” x 15.7”
1430
.001 degrees
1sec/90 degrees
MACHINE ELECTRICS
MACHINE ELECTRICS
AC200/220V +/-10-15%; 50-60Hz; 29 KVA
MACHINE DIMENSIONS AND WEIGHTS
L x W x H
Weight 		151 x 78 x 110
15000lbs.
 
Note: specifications and equipment supplied subject to change without notice

 

Standard Equipment
• Fanuc 18iM control
• Fanuc 20hp spindle drive
• Fanuc axis servo drives
• 12,000 rpm direct drive spindle
• Ceramic spindle bearings, oil mist lubrication
• CAT40 taper
• 40 tool automatic tool changer
• Lift-up chip conveyor
• Dyna Scale ballscrew compensation-all axes
• NC rotary table
• Coolant thru spindle - 256 psi
• Ceiling shower coolant
• Bed flush coolant
• Halogen work light
• Complete chip and coolant guarding
• Door interlocks
• Three color work status lights
• Inch/metric switchability
• Additional “M” functions, 2 pairs
• Spindle override
• Program memory: 233 meters
• RS232-C port
• Helical interpolation
• Standard tools for machine
• Leveling blocks
Options Available
• 2APC
• HSK63A spindle taper
• Spindle chiller
• Additional part program storage
• Tool life management
• Automatic tool length measurement and breakage detection
• Part probe