A full-process, high-performance traveling column horizontal designed for multiple operations on prismatic parts in shops of all sizes. A “wide response” full-process spindle, high rapid traverse rates, a fast two-pallet shuttle system, and large capacity tool storage make the JE60S the preferred economical choice for profitably processing anything from free-machining aluminum to hardened D2 tool steel at both ends of the part volume production spectrum.
JE60S Machine Specifications |
| AXIS TRAVEL |
X axis travel
Y axis travel
Z axis travel
Distance from top of table to spindle nose
Distance from table center to spindle nose |
23.6"
23.6"
24.8"
2.0"-25.6"
5.9"-30.7" |
| FEEDRATES |
Rapid traverse (X/Y/Z)
Cutting feedrate (X/Y/Z)
Acceleration (X/Y/Z)-G |
1,970 ipm
0-591ipm
0.7G |
| THRUST |
X axis
Y axis
Z axis |
1,125 lbs.
1,125 lbs.
1,125 lbs. |
| TABLE |
Table work surface
Table surface design
Maximum table load 1,100 lbs.
Distance from floor to top of table |
19.7" x 19.7"
(24) 5/8"-11UNC tapped holes
1,100 lbs.
43.3" |
| SPINDLE |
Spindle taper
Spindle bearing diameter
Spindle speed range
Spindle drive type
Spindle ramp-up time
Spindle horsepower (30 min/cont)
Spindle torque
Rigid tapping (max. rpm)
Lubrication type
Cooling type |
CAT 40
3.35"
40-13,000 rpm (2 range)
Built in
1.5 seconds
29.5 HP/ 25 HP
122 ft.lbs.
4,000 rpm
Oil-air
Oil chiller w/air |
| ACCURACY |
Positioning (full stroke, all axis)
Repeatability |
0.00012"
± 0.00004" |
| MOTORS |
Spindle motor
Feed motors (X/Y/Z)-YASNAC |
AC 29.5HP
7.7 HP |
| AUTOMATIC TOOL CHANGER |
Tool change method
Tool shank type
Tool retention knob
Tool storage capacity
Tool selection type Bi-directional memory
Maximum tool diameter (adj. pocket empty)
Maximum tool length
Maximum tool weight
Tool change time (tool to tool)
Tool change time (chip to chip) |
Double arm, random, bi-directional
CAT 40
MAS type II (60)
60
Bi-directional memory
2.95" (5.71)
13.78"
17.64 lbs.
1.0 sec.
3.0 sec. |
| AUTOMATIC PALLET CHANGER |
Pallet work surface
Maximum pallet load
Shuttle clearance
Table surface design
Number of pallets
Pallet indexing
Indexing speed
Indexing accuracy
Pallet change method
Pallet change time |
19.7" x 19.7"
1100 lbs.
26.4"dia x 29.5" high
(24) 5/8"-11 tapped holes
2
1 degree
1.2 sec. per 90 degree
± 3 arc seconds
Rotating
6.0 sec. |
| TANK CAPACITIES |
Cutting fluid
Hydraulic fluid
Lubrication fluid |
132 gal.
2.7 gal.
0.6 gal. |
| POWER SOURCES |
Electric power supply
200V AC ±10% 3-ph 50/60Hz ±2%
220V AC ±10% 3-ph 60Hz ±2%
Maximum power consumption
60 KVA |
| MACHINE |
Weight 19,840 lbs.
Size (W x D x H) 91" x 172" x 114" |
| |
| Note: specifications and equipment supplied subject to change without notice |
