The Enshu JE80 is a high-performance horizontal machining center designed for multiple operations on larger parts such as engine blocks, transmission housings, large pump and compressor bodies, and mold bases. High rapid traverse rates, advanced design spindle carrier, fast pallet shuttle system, high speed index table and large capacity tool storage make the JE80 the ideal choice for #50 taper production machining.
JE80 Machine Specifications |
| AXIS TRAVEL |
X Axis Travel
Y Axis Travel
Z Axis Travel
Distance from top of table to spindle nose
Distance from table center to spindle nose |
31.5"
31.5"
31.5"
0.0" - 29.5"
5.9" - 37.4" |
| FEEDRATES |
Rapid Traverse (X/Y/Z)
Cutting Feedrate (X/Y/Z) |
1417 ipm
0-394 ipm |
| TABLE |
Table Work Surface
Table Surface Design
Maximum Table Load
Distance from Floor to Top of Table |
24.8" x 24.8"
(24) 5/8"-11UNC tapped holes
1760 lbs.
45.5" |
| SPINDLE |
Spindle Taper
Spindle Speed Range
Spindle Drive Type
Spindle Horsepower (30 min/cont)
Spindle Torque
Rigid tapping (max. rpm) |
CT50
40-7,000 RPM
Built-in
35.4 / 30HP
147 ft/lbs.
4,000 |
| ACCURACY |
Positioning (full stroke, all axis)
Repeatability X/Y/Z |
0.0002"
± 0.00012" |
| AUTOMATIC TOOL CHANGER |
Tool Shank Type
Tool Storage Capacity
Max. tool diameter (adj. Pocket empty)
Max. tool length
Max. tool weight
Tool change time (tool-tool)
Tool change time (chip-chip) |
CT50
40
4.7" (9.4")
17.7"
55lbs.
1.8 sec
4.4 sec |
| AUTOMATIC PALLET CHANGER (OPTIONAL) |
Pallet Work Surface
Maximum Pallet Load
Table Surface Design
Pallet Change Method
Pallet Change Time |
24.8"x24.8"
1760lbs.
(24) 5/8"-11 UNC tapped holes
Rotary
10 sec |
| MACHINE ELECTRICS |
| Electric Power Supply
Max Power Consumption
Compressed Air |
200V AC ±10% 3-ph 50/60Hx ±2%
220V AC ±10% 3-ph 60Hx ±2%
70KVA
73-116 psi |
| MACHINE DIMENSIONS & WEIGHTS |
Weight
Size (WxDxH) |
22,700 (Type A)
24,024 (Type C)
165"x146"x120" (Type A)
117"x146"x120" (Type C) |
| |
| Note: specifications and equipment supplied subject to change without notice |
